PECO facette Elément filtrant coalescent CAA38-5SB
-
marque
LEFILTER -
modèle:
-
brève introduction
PECO facette Elément filtrant coalescent CAA38-5SB
Télé:+ 86-373-2618077
E-mail:export@lefilter.com
Présentation
INTRODUCTION:
Facet CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from jet fuel.
The Facet coalescer separator housings equipped with CAA Series 5 coalescer and companion separator cartridges have been tested and fully qualified to meet the performance requirements to EI 1581, Fifth Edition, Category C (Category C replaces the previous class A, B, and C of API 1581 3rd Edition.)
Built for balanced fluid flow-thru and structural strength, each CAA Series 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a coated, perforated metal center tube—all encased in an outer sock material. All are 6” OD (152 mm) by 31∕2" ID (89 mm) and available in standard interchangeable nominal lengths from 111∕4" (290 mm) to 571∕4" (1450 mm).
The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance—uniform threads, no shrinkage, no galling and no gasket to recover.
A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out.
MATERIALS:
• All metal components are treated against corrosion
• Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
• Buna-N gaskets—other materials are available on request
FEATURES:
• Tested and qualified to the Fifth Edition of EI 1581, Category C
• Multi-layered media for increased solids holding capacity
• Ultra-fine solids removal
• Maximum water coalescence
• Balanced cartridge flow characteristics
• Recommended maximum operating temperature: 240°F (115oC)
• Withstands in excess of 75 psi differential pressure
• pH range from 5 to 9
• Screw base or open-end configuration
APPLICATION:
This standard line of high flow coalescer cartridges is mainly for aviation kerosene to removes ultra-fine solids and enhances separation of water from jet fuel.
Contact:
Attn: Ms.Ada
Email: filtersales03@le-filter.com
Whatapp/Mobile/Wechat:0086 18695927657
Skype:filtersales03
Exemple de succès
merci de nous laisser votre message ,lefilter vous répondra pendant 24 heures!
Produits
Contactez-nous
Afin de obtenir plus info. Et le prix ,bavardons-nous maintenant !
- télé:0086-373-2515856
- Fax:0086-373-3339377
- E-mail: overseas@xxfilter.com
- Skype: lefilteryu